Endura Faux Fusion™ is a water‑based, semi‑transparent (or translucent/semi‑transparent) stain designed to color and enhance porous concrete surfaces — both interior and exterior. It’s part of the lineup from NewLook International, alongside their solid‑color and enhancer stains.

Unlike heavy coatings or opaque stains, Faux Fusion is engineered to let the concrete’s natural texture and variations show through. It’s formulated for a “faux acid” look without the hazards of traditional acid stain — no dangerous chemicals, no fuming, and no tricky neutralization.

Because it’s “low‑build,” Faux Fusion does not significantly change the surface texture or feel. Instead it settles into the highs and lows of smooth, stamped or textured concrete — giving a natural, variegated, and often vintage or antiqued look.

What It’s Good For — and What You Get

Key Benefits

  • “Acid‑stain” look without acid
     Faux Fusion delivers that mottled, multi‑tone appearance typical of acid‑stained concrete — but without corrosive chemicals or the need for special ventilation or gear.

  • Versatility
     Works on stamped concrete, flat slabs, patios, pool decks, driveways — both interior and exterior.

  • Easy to apply
     It's a single‑component stain: ready to use with minimal prep compared to multi-part stains. You can apply it with a brush, sprayer (HVLP or airless), or roller/mop depending on the surface and desired effect.

  • Natural, breathable finish
     Because it doesn’t build a thick film, the concrete stays breathable, and surface texture — smooth or stamped — remains intact.

  • Color variation and custom look
     You can use one color, or combine multiple colors wet‑on‑wet or after drying to create custom tones and richness. This makes each project unique.

Typical Use Cases

  • Antique or vintage‑style finishes on stamped concrete

  • Patios, pool decks, driveways, backyard slabs

  • Interior floors (basements, garages, workshops)

  • Renovation projects — refreshing faded or worn concrete instead of replacing it

  • Decorative concrete where you want depth, texture, and natural variation instead of a flat uniform color

How to Use Endura Faux Fusion™ — Best Practices

Here’s a general outline of how to apply Faux Fusion for good results:

  • Surface Prep: The concrete must be cleaned, degreased, and free of sealers or contaminants. For best performance, prepare the substrate properly.

  • Mixing: Faux Fusion is ready to use — but pigments can settle, so agitate or shake well before use. During long jobs, re‑agitate if left unused for a while.

  • Application: Use a NewLook applicator brush, an HVLP/airless sprayer, or other finishing tool. Apply lightly, using random motions, overlapping passes, or multiple colors if you want a “faux‑acided” or hand‑finished look. Don’t over-apply or let puddles form.

  • Color Depth & Variation: You can wash it on lightly for a subtle effect, or apply additional coats to deepen the tone. Multiple colors — layered or blended — create rich, artistic finishes.

  • Sealing (Optional but Recommended): Faux Fusion has some built‑in sealer‑like properties, but for best durability — especially outdoors or in high traffic — applying a compatible topcoat or sealer will extend longevity and protect the finish.

When to Use Faux Fusion — and When Something Else Might Be Better

Use Faux Fusion when:

  • You want a natural, mottled, acid‑stained look without the hazards of acid.

  • Your concrete is smooth or stamped and you want to highlight texture and depth.

  • You want color variation — randomized tones, layered shades, or mixed colors.

  • You care about breathability and preserving surface texture, not covering it with a thick film.

You might choose a different product if:

  • You need to completely hide stains, discoloration, or imperfections — in which case a solid color stain (like Endura’s solid stain or other opaque stains) might be more appropriate.

  • You want a uniform, solid color finish, rather than a variegated/antiqued look.

  • The concrete surface is sealed already and you’re unsure of adhesion — or you’re dealing with heavy coatings or oil contamination that might prevent good stain penetration.

Key Takeaways: What Is Endura Faux Fusion™?

Endura Faux Fusion™ is a flexible, contractor‑grade semi‑transparent stain that delivers a natural, decorative, acid‑stain–style finish without the danger and complexity of real acid. It’s ideal for stamped concrete, patios, pool decks, driveways, interior slabs — wherever you want a beautiful, variegated, textured concrete finish that feels custom and unique.

If you combine proper surface prep, good application technique, and optional sealing afterward — you can get durable results that enhance the look and value of the space. Let me know if you want, I can put together a step-by-step installation checklist for Faux Fusion to make it easy for your clients or team to follow.

For more product information, and tutorial click here.