| Description |
Water-based nano-acrylic top coat sealer for protecting decorative concrete stains, coatings and other porous masonry surfaces. |
Water-based, Nano-acrylic Urethane top coat sealer with 25% or 30% solids content. Use on interior & exterior surfaces for protecting concrete. |
Permanent (non-sacrificial) anti-graffiti coating. Water-based polymeric nano-infusion based formula seals and protects vertical masonry surfaces from graffiti & paint. |
Water-based, inorganic elastomeric concrete waterproofing sealer (non-reactive) with remarkable adhesion. Protects many porous architectural surfaces from water & liquids, including concrete, brick, stucco, and wood. |
Water-based polymer modified rubber silicone membrane. Creates a water and vapor barrier membrane that completely retards moisture & vapor transmission for below grade (subterranean) surfaces. |
Chemical resistant 2-part epoxy top coat sealer with 100% solids content. Use for protecting decorative concrete coatings, commercial and industrial hardscapes. |
| Base |
Nano-acrylic |
Nano-acrylic Urethane |
Modified Polymer |
Polysiloxane Silicone |
Rubber Silicone |
Epoxy |
| % Solids |
22% Solids |
25% or 30% Solids |
45% Solids |
6% Solids |
70% Solids |
100% Solids |
| Finish |
Matte, Satin & Gloss |
High Gloss & Low Gloss |
Satin |
Satin |
Black |
Gloss -Avail. in Clear, Gray, White |
| Approx Sq. Ft./Gal |
Unsealed: 200-400 & Sealed: 400-600 |
Unsealed: 200-400 & Sealed: 400-600 |
100 |
+/- 200 |
28 sf/gal @ 60-mils wet (40-mils cured) — 19 sf/gal @ 90-mils wet (60-mils cured) |
100-125 |
| VOCs |
< 100 g/L |
< 100 g/L |
< 2 g/L |
0 g/L |
0 g/L |
0 g/L |
| Install Equipment |
Sprayer, brush or paint roller |
Sprayer, brush or paint roller |
Low pressure sprayer (wet on wet) |
Low pressure sprayer (wet on wet) |
Airless sprayer (wet on wet) |
Porcupine roller / squeegee |
| Curing |
Initial Cure: 1-2 hrs. Final Cure: 7-10 days |
Initial Cure: 1-2 hrs. Final Cure: 7-10 days |
Initial Cure: 2 hrs. Final Cure: 24-48 hrs. |
Initial Cure: 1-2 hrs. Final Cure: 24-48 hrs. |
Initial Cure: 30 min. Final Cure: 24-48 hrs. |
Initial Cure: 24 hrs. Final Cure: 7-10 days |
| More Info |
Exterior & interior surface protection; Excellent blush & early water resistance; May be applied to damp concrete surfaces; Good hot-tire pickup resistance; Early block resistance; reduces dirt pickup; Non-yellowing; Strong UV-resistance; Resistant to water, chemicals and abrasion |
Exterior & interior surface protection; Excellent blush & early water resistance; May be applied to damp concrete surfaces; Good hot-tire pickup resistance; Early block resistance; reduces dirt pickup; Non-yellowing; Strong UV-resistance; Resistant to water, chemicals and abrasion |
Breathable, UV-resistant and non-yellowing; Excellent penetration on porous surfaces; Suitable for painted surfaces; Mold and salt-air resistant; Great chemical and abrasion resistance; Long-lasting protection for all types of vertical surfaces; Water-based VOC compliant; Ambient cure |
Breathable, impermeable water barrier; Excellent temperature resistance to extreme temperatures from -65º F to 400º F; Abrasion & chemical resistance; Eco-friendly & VOC compliant; Excellent elasticity (up to 400%); Prevents treated surface from freeze thaw, cracking & spalling |
Performs as a vapor and water barrier; Apply to green or uncured concrete and to damp surfaces; Non-hazardous, non-toxic and non-flammable (VOC Compliant); Excellent elongation and elasticity; Good tensile strength; Exceptional bonding properties; Not affected by ponded water; Repairs cracks, joints and spalling with mats or mesh material |
Concrete countertops and precast concrete sinks; Garage floor epoxy and bar top epoxy concrete sealer; Garage floor clear epoxy concrete sealer; Chemical resistant sealer for commercial / architectural concrete; Tensile strength: 10,000 psi; Flexural strength: 24,000 psi; Compression strength: 19,000 psi. Note: 30 minute pot life. |
SmartSeal WB
Endura AU
Proteshield
HydroHalt
100% Epoxy
DriveHard
Nanoset Densifier NS