Why Our Concrete Staining Solution Works (When Others Don’t)
Most people buy a “concrete stain,” apply it, and hope for the best. Wrong. It WILL fail. That’s why so many customers come to us AFTER their first attempt peels, blotches, or fades. Our complete staining solution works because every step prepares the concrete for deeper absorption, stronger color, and longer-lasting results — every single time.
Benefits You Get
✔ Rich, deep, professional color
✔ Makes old concrete look NEW again
✔ Works indoors & outdoors
✔ No peeling, blotching, or premature fading
✔ DIY-friendly
If you want REAL results, you need the right solution, not just the stain.
Fast 3-Step Concrete Staining Solution Optional Step (if needed): Strip (Only if you have old stain/sealer)
If your concrete has ANY coating on it…
STOP — DO NOT APPLY STAIN. You MUST remove it first.
EasyStrip 1000
Removes acrylic coatings quickly and safely.
QuickEtch™
Eco-friendly etching gel for maximum stain absorption.
Your 4-Step Concrete Staining System
Enter your total area in square feet to see how many gallons you’ll need for each step.
Step 2 – Prep & Clean
Coverage: 250 sq ft per gallon
You’ll need 0 gallon(s).
Step 3 – Stain / Color
Coverage: 300–400 sq ft per gallon (per coat)
You’ll need between 0 and 0 gallon(s) .
Step 4 – Seal
Coverage: 200–400 sq ft per gallon (unsealed surfaces)
You’ll need between 0 and 0 gallon(s) .
Step 1: Prep & Clean
The step beginners skip — and the step professionals NEVER ignore. Prep = open pores = perfect stain absorption. Skipping this step causes blotchy, uneven color.
Step 2: Apply Your Stain
Mix your NewLook color → spray, broom, or roll the stain → watch your concrete transform.
Step 3: Seal & Protect
You already put in the work — now protect your finish. Sealers lock in color and prevent UV fading, moisture damage, and surface wear.
Before & After Results
Before: Patchy. Faded. Lifeless.
After: Clean. Bright. Bold. Protected.
Thousands choose our complete staining solution because it never fails when followed correctly.
Quick FAQs (Eliminate Doubts Fast)
Can I stain without prep?
No. Prep is REQUIRED for the stain to bond correctly.
Can I stain over paint?
Absolutely not. Strip first.
Do I really need a sealer?
Yes — if you want the color to last.
Is this DIY-friendly?
Very. Anyone can follow the 3-step solution.
⚠ Don’t Waste Your Money on a Single Product
Stain alone = failure.
Prep alone = no color.
Sealer alone = nothing to seal.
Using only one product is why most concrete stain jobs fail.
The complete staining solution is what gives you long-lasting, professional results.