DriveHard Pro 244 | Premium Concrete & Masonry Weatherproofer – NewLook Int

Coverage Calculator

DriveHard Pro 244

$87.14

In StockIn StockOut of stock
Shipping calculated at checkout.

DriveHard Pro 244 is a high-performance concrete densifier and water repellent designed to strengthen, protect, and extend the life of concrete and masonry surfaces. This advanced, water-based lithium densifier penetrates deep... Read more

Size: 1 Gal

  • 1 Gal
  • 5 Gal
$87.14
Out of stock

visaamerican expressdiscovermasterapple paygoogle pay
SKU: NLC-101-1N/ACategories: Concrete Sealers & Protective Coatings, Shop

DriveHard Pro 244 – Concrete Densifier & Water Repellent

Premium Lithium Densifier & Weatherproofing Treatment for Concrete and Masonry

DriveHard Pro 244 is a high-performance concrete densifier and water repellent designed to strengthen, protect, and extend the life of concrete and masonry surfaces. This advanced, water-based lithium densifier penetrates deep into the substrate, where it chemically reacts to densify, fortify, and create long-lasting water resistance.

Unlike topical sealers, DriveHard Pro 244 forms no surface film, allowing the concrete to remain breathable while improving durability and resistance to environmental damage.

Deep Penetrating Protection That Lasts

DriveHard Pro 244 uses a high-solids lithium densifier formula to permanently enhance the performance of concrete by filling micro-pores and reducing water intrusion.

Key Benefits

  • Premium lithium densifier for concrete and masonry
  • Penetrates deeply and chemically reacts with the substrate
  • Creates a water-repellent, breathable surface
  • Helps prevent damage from freeze-thaw cycles
  • Reduces deterioration from water and alkali salts
  • Increases surface strength and abrasion resistance
  • Will not peel, flake, or trap moisture vapor
  • Maintains natural appearance (no gloss or film)
  • Improves longevity of concrete surfaces
  • VOC compliant and environmentally friendly

Recommended Uses

DriveHard Pro 244 is ideal for:

  • Concrete driveways and sidewalks
  • Garage floors and slabs
  • Warehouses and industrial floors
  • Patios and outdoor hardscapes
  • Masonry and block surfaces
  • Polished concrete floors
  • Broomed or textured concrete

This penetrating concrete densifier is designed for both residential and commercial applications where durability and water resistance are critical.

How It Works

DriveHard Pro 244 penetrates into the concrete and reacts with free lime and other compounds to:

  • Densify and harden the surface
  • Reduce porosity and water absorption
  • Increase resistance to abrasion and weathering
  • Protect against salt and alkali damage

The result is a stronger, longer-lasting, and water-resistant concrete surface without changing its natural look or texture.

Application

  1. Ensure surface is clean and free of contaminants.
  2. Apply evenly using a sprayer, roller, or microfiber applicator.
  3. Allow product to penetrate into the surface.
  4. Remove excess material to prevent residue.
  5. Allow to cure before exposure to heavy traffic.

Coverage

Coverage varies depending on surface porosity and condition.

Approximate Coverage Rates

  • Polished Concrete (after 200 grit): ~400 sq. ft. per gallon
  • Machine Troweled Concrete:
  • Fresh concrete: ~600 sq. ft. per gallon
  • Older concrete: ~500 sq. ft. per gallon
  • Broomed / Textured Concrete: ~350 sq. ft. per gallon

Previously densified surfaces may require less material.

Finish & Appearance

  • Natural, non-film forming finish
  • Does not alter surface texture
  • Enhances clarity and reflectivity when polished
  • Leaves a breathable surface

Performance Benefits

Weatherproof Protection

Helps prevent damage caused by rain, moisture, and freeze-thaw cycles.

Water Repellency

Reduces water intrusion while allowing vapor to escape.

Long-Term Durability

Strengthens concrete from within for extended service life.

Salt & Alkali Resistance

Minimizes damage caused by deicing salts and mineral intrusion.

Sizes Available

  • 1 Gallon
  • 5 Gallons

Precautions

  • Test in a small area before full application
  • Do not allow excess material to dry on surface
  • Apply to clean, absorbent concrete only
  • Use appropriate protective equipment
  • Store in a cool, dry place
  • Keep out of reach of children

Freight: All shipments shall be F.O.B. Shipping Point, sent using the Buyer’s shipping account, with a $1.25 handling & packaging charge per box added to the invoice; or C.O.D. and shipping charges being paid in advance by NewLook shall be added to the invoice.

Any claims for loss or damage should be made promptly to the carrier at the time and place of delivery. Unless otherwise instructed in writing, Seller is authorized, as Buyer’s agent and at Buyer’s risk, to determine means of transportation and to choose the carrier.

What is a lithium densifier?

A lithium densifier is a penetrating treatment that reacts with concrete to increase hardness, durability, and resistance to moisture.

Does this product leave a coating?

No. DriveHard Pro 244 is a non-film forming densifier, meaning it penetrates and strengthens without leaving a surface coating.

Can this be used outdoors?

Yes. It is ideal for outdoor concrete surfaces, especially where weather protection is needed.

Will it make concrete waterproof?

It makes concrete highly water-repellent, but still breathable, allowing vapor to escape.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

DriveHard Pro 244

1 Gal
1 Gal
$87.14